|Vehicle||Data file||SusProg3D version (minimum)|
|DeTomaso Pantera. 1972 Standard configuration.||PanteraStock||V4.11a (Build 294.1)|
|DeTomaso Pantera. 1972 With Corvette uprights.||Pantera Corvette||V4.13 (Build 308.0)|
Falcon XA - XD
Must use a wedge under the balljoint to correct balljoint angle. ie Pro Motorsports kit for Mustang. If this isn't done the balljoint WILL fail.
To gain more castor shift upper arm back by 5mm. Don't do this for XA, XB, XC Falcons if running wide ie 9" wheels as tires already hit at rear of arch.
This modification also reduces tire contact with guard as you substitute positive camber gain for negative.
With custom made Lovells
Sport Low 700 lb/inch must raise bump stop - check for bind very carefully.
No need to raise for XA, XB, XC Falcons.
|FalconXD standard - lowered||V4.21g (Build 341.7)|
442 Locost Chassis
It Has Inboard Motorcycle Coilovers Front And Rear With Bellcrank & Pushrods At All 4 Corners. Rearend Dimensions Are For The Nissan 240Sx Differential And Halfshafts.
To SusProg3D Download Page
Return to SusProg3D suspension types page
Mailing List and be kept informed on the latest developments
© 2012 Beven D Young All rights reserved
This page was last modified: